AcreditaCión
CalibraciónDimensional
Vernier
0.05 in to 40 in
1.27 mm to 1,016mm
Micrómetro
0.05 in to 24 in
1.27 mm to 609.6 mm
Micrómetro interior
0.05 in to 12 in
1.27 mm to 304.8 mm
Micrómetro Interior Tres Contactos
14 mm to 75 mm
Medidor de altura
0.05 to 40 in
1.27mm to 1,016mm
Indicadores de prueba
0.005 in to 0.05 in.
0.127mm to 1.27mm.
Dial e indicador digital
0.005 in to 2 in
0.127mm to 50.8mm
Pin gages
0.000 5 in to 1 in .
0.0127mm to 25.4mm
Thickness Gage
0.001 mm to 25 mm
Protactor
1° to 90°
Flexmeter Rule
1 mm to 1 000 mm
Optical Comparator
X Axis Linearity
Y Axis Linearity
5 mm to 200 mm
Optical Comparator
Magnification
10X
Optical Comparator
Angularity
1° to 360°
Optical Comparator
Squareness
90°
Digital Microscope,
Vision System.
X Axis Linearity
Y Axis Linearity
Up to 200 mm
Digital Microscope, Vision System Angularity
1° to 360°
Coating Thickness Gauge Ferrous Base.
0.022 mm to 12.255 mm
Coating Thickness Gauge Base
0.022 mm to 12.255 mm
Surface Plates
Up to 0.002 in
Diagonal
Mass, Force and Weighing Devices.
Scale
1 kg to 200 kg
(Res.= 0.01 kg)
Analytical Balance
1 g to 200 g
(Res.= 0.001 g)
200 g to 10 000 g
(Res.= 0.001 g)
Thermodynamic
Ovens, Muffles, Freezer System Accuracy
-10 °C to 1 200 °C
Thermohygrometers
20 °C to 40 °C
30 % RH to 75 % RH
IR Thermometer
50 °C to 450 °C
Digital Thermometers, Indicators, ThermoHygrometer
with Sensor Type J, K, T & RTD.
20 °C to 500 °C
Temperature System Accuracy Test (SAT)
Furnace, Autoclave, Freezer, and Isothermal Sources with Thermocouple Types
K,J,T,RTD (pt100)
Temperature Uniformity Surveys (TUS)
Furnace, Autoclave, Freezer, and Isothermal Sources with
Thermocouple
Types
K,J,T,RTD (pt100)
Electrical
Indicators, Controllers, Thermo-hygrometer Recorders, Thermal
Chamber and Freezer used with thermocouple Type J, K, T, E & RTDs
Time and Frequency
Stopwatch and Timers
60 s to 86 400 s
Contact Tachometer/ Photo Tachometer
25.13 rad/s to 2 094.19 rad/s
Chemical
pH Meter
4 pH – 7pH – 10pH
Conductivity
Meters
100 µS/cm
1 000 µS/cm
1 413 µS/cm
Acreditación
DIMENSIONAL
Vernier, Micrómetro y Medidor de ángulo digital
Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.
Aliados Comerciales
Presión
Electrica
Dureza
Bloques Patrón
Analisis Dimensional
Fabricacion de FIXTURES y PIN GAGE
